Hey guys,
I have purchased some jets for my twin sideys, but for a standard a12, require 4 26mm chokes. I have 28 and they are slightly too big as I don't have a cam, it chokes up around 1500-2000rpm.
Any help appreciated,
Cheers Cole
Sent from my SM-G930F using Tapatalk
Wanted - 26mm chokes dhla 40 Dellorto side draft
-
twin120ys
- Committee Members
- Posts: 240
- Joined: Wed Oct 30, 2013 6:22 pm
- aka: Darrell or Cole
- Location: Bay of Plenty/Auckland
- Contact:
Wanted - 26mm chokes dhla 40 Dellorto side draft
75 120y B210 Sedan
75 120y B210 SSS Sedan Project
77 120y B210 Sedan Project (almost complete!)
75 120y B210 SSS SEDAN (sold)
75 120y B210 SEDAN (sold)
75 120y B210 SSS Sedan Project
77 120y B210 Sedan Project (almost complete!)
75 120y B210 SSS SEDAN (sold)
75 120y B210 SEDAN (sold)
Re: Wanted - 26mm chokes dhla 40 Dellorto side draft
why not just fit a sss cam?
-
twin120ys
- Committee Members
- Posts: 240
- Joined: Wed Oct 30, 2013 6:22 pm
- aka: Darrell or Cole
- Location: Bay of Plenty/Auckland
- Contact:
I have a cam which is a little more lethal than sss, my limited budget isn't allowing me to get it in at the moment. Also need to work out how to easily install? Unsire about the whole degree thing. All savings towards uni at the moment, I'd love to get it in. Just need the knowledge
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
75 120y B210 Sedan
75 120y B210 SSS Sedan Project
77 120y B210 Sedan Project (almost complete!)
75 120y B210 SSS SEDAN (sold)
75 120y B210 SEDAN (sold)
75 120y B210 SSS Sedan Project
77 120y B210 Sedan Project (almost complete!)
75 120y B210 SSS SEDAN (sold)
75 120y B210 SEDAN (sold)
Re: Wanted - 26mm chokes dhla 40 Dellorto side draft
You could try Palmside down here in Chch. 26mm is an unusually small size though but you never know...
To be honest by the time you buy the chokes and muck around getting the jetting right it may be cheaper to install the cam ( or pay someone to do it for you which should not be too bad if you take the motor out and refit yourself- just remember to get the followers refaced )
Cheers
Dave
To be honest by the time you buy the chokes and muck around getting the jetting right it may be cheaper to install the cam ( or pay someone to do it for you which should not be too bad if you take the motor out and refit yourself- just remember to get the followers refaced )
Cheers
Dave