Page 28 of 32
Re: gingofthesouth's Orangatang 510
Posted: Mon Jan 02, 2017 3:30 pm
by torqued
That looks like really tidy work,
The radiator support where it ties to the intercool is an especially nice touch
Re: gingofthesouth's Orangatang 510
Posted: Mon Jan 02, 2017 3:45 pm
by brocky41
dattoboy wrote:Fanstastic progress Ging and good to see frequent updates.
On a side note. What leads are you running on the FJ? I ended up running ones from aussie that cost a tonne and yours are a lot longer.
I used Top Gun TG4548 - can still get on ebay
http://www.ebay.com/itm/Top-Gun-Spark-P ... 4l&vxp=mtr" onclick="window.open(this.href);return false;
Re: gingofthesouth's Orangatang 510
Posted: Mon Jan 02, 2017 4:20 pm
by gingofthesouth
dattoboy wrote:Fanstastic progress Ging and good to see frequent updates.
On a side note. What leads are you running on the FJ? I ended up running ones from aussie that cost a tonne and yours are a lot longer.
NOS ones from a local wrecker still in the sealed plastic bag.
Re: gingofthesouth's Orangatang 510
Posted: Mon Jan 02, 2017 5:53 pm
by brocky41
NOS parts from a wrecker - thats OG right there.
Re: gingofthesouth's Orangatang 510
Posted: Mon Jan 02, 2017 10:48 pm
by broke
torqued wrote:That looks like really tidy work,
The radiator support where it ties to the intercool is an especially nice touch
+1, a lot of thought must have gone in to that
Re: gingofthesouth's Orangatang 510
Posted: Mon Jan 02, 2017 11:18 pm
by gingofthesouth
broke wrote:torqued wrote:That looks like really tidy work,
The radiator support where it ties to the intercool is an especially nice touch
+1, a lot of thought must have gone in to that
The guys who did the work are no amatuers. They used to be fabricators at Speedtech so the quality of the work is very good. I'd suggest they've probably done a ton of similar jobs in the past where they have done the same setup.
Check out the work they are doing on that Matt Gaskin Skyline in preparation for Lead Foot Festival!
https://www.facebook.com/kaizen.works.ltd/" onclick="window.open(this.href);return false;
Re: gingofthesouth's Orangatang 510
Posted: Tue Jan 03, 2017 5:52 pm
by brocky41
I just looked at the photos again - looking sweet.
Re: gingofthesouth's Orangatang 510
Posted: Tue Aug 01, 2017 9:44 pm
by gingofthesouth
Some things happening.
Exhaust getting done in the 3 inch stainless mandrel bend variety.
Fuel system getting sorted.
Turbo oil and water lines.
I'll do a proper update when that work is completed.
IMG_6282.JPG
IMG_6281.JPG
IMG_6279.JPG
IMG_6277.JPG
IMG_6276.JPG
IMG_6275.JPG
IMG_6280.JPG
IMG_6283.JPG
Re: gingofthesouth's Orangatang 510
Posted: Wed Aug 02, 2017 9:04 am
by torqued
Wow, some very nice goodies going in there.
Really impressed with the direction this is heading.
Going to be very cool
Re: gingofthesouth's Orangatang 510
Posted: Wed Aug 02, 2017 10:07 pm
by broke
Always nice to see updates on this. Never heard of this Kaizen works before but they sure do a tidy job!
Where are you mounting your fuel pumps? Looks like we're both using the Carter 4070 as the lift pump too.