Jaime's 180B

[Jaimesix]

Hi.

Yes the 7/8ths is the one that works. I'll take some photos this weekend.

Here a photo of the engine clip.

[Jaimesix]

Howzit mates.

A year after. Been busy, but close to completion. SR20 T.

Engine in car, working final connections. A few photos :



Sorry...trying to find out why I can not upload photos.

Cheers.

[Bartman]

Good to see you're still around Jamie.
Sorry I can't offer any help with posting pictures.

[DJZ]

I've fixed the one that you'd linked. Photobucket can be a real pain, the easiest way is to click the "direct" link button in Photobucket (top right when you are looking at the photo, in the "Links to share this photo" box) and then in the forum above where you write hit the "Img" button and paste the link in between the "[ img][/img ]".

[Jaimesix]

Hi Bart. Thanks, still around.

Just came back from a trip, ready to put an end to my 180B/610 work. Time to get it on road.

DJZ, thanks, will give it a try again.

[Jaimesix]

[Jaimesix]

Any advise on which sway bar would work on front ? I do not think the stock shape 610 would work under the SR motor.

Cheers.

[Bartman]

You could buy one from datsport in Aussie, or go visit a local spring maker, and have one custom made.

[Jaimesix]

How it guys.

It has been a while.
Went for an SR20 swap but the mechanic doing it was a fake.

Lost money and plenty time. Prior photo shows car at that grease monkey's dump. Cost a fortune to undo and re do what that guy did.

Caveat emptor my friends

Well. Moving along.

Now car is on the road !

[Jaimesix]

IMG_1243.JPG

Here it is.

Datto 180B