Page 91 of 91

Re: Kitchs 1200 Coupe - road legal!

Posted: Fri May 06, 2016 7:04 am
by Kitch
Well the car is going, after recent rebuild; Although I had to remove the flows and re blast them & coat them, as used wrong grade of heat paint! (gggrrrrrrr...)

I have done about 100 miles or so in it in the last 3 weeks, and it is pulling strong, but have unfortunately discovered nasty as stress fractures in my custom inlet manifold so thats off being repaired at the moment.

Plan is to repair manifod, then get a custom built copper core radiator to help with it running a tad hot, as think my "pusher" fan setup is not the most effective.

Once thats all sorted and another hundy miles or so on it, I will be taking it back for a final tune, which will be interesting as I believe it is going way better than previous, so hopefully I will nett my target of 130hp this time round (was 123 hp last time).

Before I pulled manifold off, I took it for one last outing while it was going, and that was to a local charity car show, with around 100 cars there, I was pretty stoked to be awarded 1st Place for the show, car looked good after a quick wax in the morning

Want to have all the bugs ironed out, and last few "finishing" things sorted over next few months, as looking forward to entering it in the Four & Rotary Nat's in Timaru later in the year.


20160501_135801(0).jpg

Re: Kitchs 1200 Coupe - road legal!

Posted: Fri May 06, 2016 9:25 pm
by classicdat
Awesome Kitch, well deserved. Will be great to see this at the 4&Rotors, keen to fly the club flag? We would be honoured. Must have been great to drive it again :burnout:

Re: Kitchs 1200 Coupe - road legal!

Posted: Sat May 07, 2016 7:15 pm
by Bartman
Well deserved, and hard earned indeed!
:beer:

Re: Kitchs 1200 Coupe - road legal!

Posted: Sat Dec 19, 2020 4:44 pm
by DATSN1200
Hi Kitch
Can you bolt in Datsun 240Z seats into a Datsun 1200 Sedan without modifications
Thanks
Joseph

Re: Kitchs 1200 Coupe - road legal!

Posted: Sat Dec 19, 2020 10:59 pm
by braasmonkey
DATSN1200 wrote: Sat Dec 19, 2020 4:44 pm Hi Kitch
Can you bolt in Datsun 240Z seats into a Datsun 1200 Sedan without modifications
Thanks
Joseph
Hi Joseph,

Believe Kitch bolted them in a fixed position using some adaptors across the factory mounting points.

Regards,

Nick aka Braasy