Show everyone your mean datto projects/rides
85_Z31
Datsun Master
Posts: 1494 Joined: Sun Jul 18, 2010 10:53 pmLocation: Rangiora North Canterbury
Post
by 85_Z31 Sat Aug 22, 2015 5:07 pm
Cheers Wal
Went a step futher and Mr angle grinder paid a vist to Mr Bonnet.
This is the result
The reinforcement piece shown below will sit on the underside, this one is just a mock up to see that it will work. 2 Doors is going to make up a set for me ( because im unco and sheet metal is his thing !!)
Bare Metalled the bonnet, I've been spraying the Etch primer in sections. I'm just masking off one area at a time, hand sanding all the little bits of paint i missed with the stripping disck. Then hitting it by hand with 80 grit to key the surface up. Then wax and grease remover with clean cloths. It looks significantly better than what it was.
The Answer to your Question is NEEDS MORE VG30
Bartman
Committee Members
Posts: 7303 Joined: Sat Jul 19, 2008 9:04 amLocation: Datsun CityLocation: Christchurch New Zealand!!!!
Contact:
Post
by Bartman Sun Aug 23, 2015 8:20 am
Nice!
They don't call me the man with the rubber arm for nothing you know.............
brocky41
Financial Member
Posts: 1764 Joined: Sat Jul 19, 2008 11:05 amaka: BrockyLocation: Christchurch
Contact:
Post
by brocky41 Sun Aug 23, 2015 7:48 pm
Lookin good dude,
Will you be able to run the pop up headlight covers at night (do they pop up above them or will they upset the light beam) or just for aero during the day
85_Z31
Datsun Master
Posts: 1494 Joined: Sun Jul 18, 2010 10:53 pmLocation: Rangiora North Canterbury
Post
by 85_Z31 Sun Aug 23, 2015 8:54 pm
hey brocky , cheers dude
The Answer to your Question is NEEDS MORE VG30
torqued
Datsun God
Posts: 2124 Joined: Sat Jul 19, 2008 11:49 amaka: AdamLocation: Christchurch
Post
by torqued Sun Aug 23, 2015 9:05 pm
You sure you are going to have enough height to not distort the light pattern?
thumb_maxresdefault_jpg_1_280×720_pixels_1024.jpg
You do not have the required permissions to view the files attached to this post.
"It's ok, we know what to do...we talked about this a lot on the internet."
brocky41
Financial Member
Posts: 1764 Joined: Sat Jul 19, 2008 11:05 amaka: BrockyLocation: Christchurch
Contact:
Post
by brocky41 Sun Aug 23, 2015 9:16 pm
torqued wrote: You sure you are going to have enough height to not distort the light pattern?
thumb_maxresdefault_jpg_1_280×720_pixels_1024.jpg
This - be interesting to see it on a light meter - hopefully it doesnt change too much
85_Z31
Datsun Master
Posts: 1494 Joined: Sun Jul 18, 2010 10:53 pmLocation: Rangiora North Canterbury
Post
by 85_Z31 Mon Aug 24, 2015 11:12 am
brocky41 wrote: torqued wrote: You sure you are going to have enough height to not distort the light pattern?
thumb_maxresdefault_jpg_1_280×720_pixels_1024.jpg
This - be interesting to see it on a light meter - hopefully it doesnt change too much
I hope so too, i really love the look of having the light covers. Its in prototype stage.
The Answer to your Question is NEEDS MORE VG30
D1RTY6
Financial Member
Posts: 223 Joined: Tue Jan 31, 2012 11:48 amaka: NathanLocation: ChristchurchLocation: Christchurch
Contact:
Post
by D1RTY6 Mon Aug 24, 2015 11:15 am
James that looks so awesome! Well done
85_Z31
Datsun Master
Posts: 1494 Joined: Sun Jul 18, 2010 10:53 pmLocation: Rangiora North Canterbury
Post
by 85_Z31 Mon Aug 24, 2015 10:05 pm
Wof guy said bring it on over to check it out on that machine. He said if it dosnt refract at dodgy angles then it's fine. He said that the Oem headlight itself can't be modified which it isn't.
The Answer to your Question is NEEDS MORE VG30
torqued
Datsun God
Posts: 2124 Joined: Sat Jul 19, 2008 11:49 amaka: AdamLocation: Christchurch
Post
by torqued Tue Aug 25, 2015 7:37 am
If you have a big board or a wall, you can check it on that.
"It's ok, we know what to do...we talked about this a lot on the internet."
