Dattodevil's GB120 Ute

Show everyone your mean datto projects/rides
Bartman
Committee Members
Posts: 7303
Joined: Sat Jul 19, 2008 9:04 am
Location: Datsun City
Location: Christchurch New Zealand!!!!
Contact:

Re: Dattodevil's GB120 Ute

Post by Bartman »

Not to worry. I've got my head around it now.
They don't call me the man with the rubber arm for nothing you know.............
jeremiahnz
Datsun Driver
Posts: 260
Joined: Mon Oct 13, 2008 10:11 am
Location: Auckland

Re: Dattodevil's GB120 Ute

Post by jeremiahnz »

Just wondering if anyone can help me with finding some grease catchers like in the right of this pic? Also anyone know part numbers and whether they interchange between H145/H150/H165?
CIMG3758.jpg
Thanks
You do not have the required permissions to view the files attached to this post.
1965 Bluebird 410
1976 Yamaha RD50
Bartman
Committee Members
Posts: 7303
Joined: Sat Jul 19, 2008 9:04 am
Location: Datsun City
Location: Christchurch New Zealand!!!!
Contact:

Re: Dattodevil's GB120 Ute

Post by Bartman »

You mean the gold zinc plated pressed stampings that used to go inside the backing plates?
H150, and H165 should all be the same.
They don't call me the man with the rubber arm for nothing you know.............
jeremiahnz
Datsun Driver
Posts: 260
Joined: Mon Oct 13, 2008 10:11 am
Location: Auckland

Re: Dattodevil's GB120 Ute

Post by jeremiahnz »

Yep thats the one. Part number on mine is 43234-18400.

The axle seal ain't that flash, hence looking to replace. Looks to be replaceable as a whole component (the grease catcher and inner seal) which is different to the parts book which suggests they are different parts, but then the part number is different to what the manual says it should be (manual says 43234-04101)

43234-18401 (note the 1 digit difference) is a roadster part which seams quite similar. I am wondering if I can just replace with a datsun 1200 part (or newer) and if so, who might stock something so I can go match up.
1965 Bluebird 410
1976 Yamaha RD50
User avatar
Dattodevil
Datsun Addict
Posts: 1189
Joined: Sat Jul 19, 2008 8:36 am
aka: Damo
Location: Christchurch, New Zealand
Location: Datsun City
Contact:

Re: Dattodevil's GB120 Ute

Post by Dattodevil »

Thought I would freshen up the brake package, I found that the Stanza 232mm front rotors are difficult to find in New Zealand, but the 910 Bluebird 250mm rotors aren't. so decided to upgrade. All that is required is to fit the 910 Rotors and caliper assemblies to my Stanza struts which incidentally seem the same.
The 910 caliper mounts are slightly taller and the pistons are slightly larger, going from 51mm piston to 54mm piston. A breakdown of the parts shown below and the difference although small is a relatively easy upgrade. Actual brakepad size stays the same DB225 (910) as apposed to DB345 (Stanza)
You do not have the required permissions to view the files attached to this post.
User avatar
Datto_610
Datsun God
Posts: 2976
Joined: Sun Jul 20, 2008 10:39 am
aka: Greg
Location: Christchurch, NZ
Location: Christchurch, NZ
Contact:

Post by Datto_610 »

Good work Damo! I thought you already had 910 bluebird struts but I guess not...
User avatar
classicdat
Committee Members
Posts: 3259
Joined: Wed Apr 21, 2010 9:59 pm
aka: Vaughan
Location: Datsun Central, Christchurch
Contact:

Re: Dattodevil's GB120 Ute

Post by classicdat »

Wow Happy Birthda GB120, First development in a long time Damo. Love this wee truck.
I notice the height is a bit different, are the calipers a different profile? Hope the won't cause you clearance issues
Datsuns from A to Zed
User avatar
Dattodevil
Datsun Addict
Posts: 1189
Joined: Sat Jul 19, 2008 8:36 am
aka: Damo
Location: Christchurch, New Zealand
Location: Datsun City
Contact:

Re: Dattodevil's GB120 Ute

Post by Dattodevil »

classicdat wrote:Wow Happy Birthda GB120, First development in a long time Damo. Love this wee truck.
I notice the height is a bit different, are the calipers a different profile? Hope the won't cause you clearance issues
The calipers sit further out, but I run 15's so have plenty of room :D
User avatar
Dattodevil
Datsun Addict
Posts: 1189
Joined: Sat Jul 19, 2008 8:36 am
aka: Damo
Location: Christchurch, New Zealand
Location: Datsun City
Contact:

Re:

Post by Dattodevil »

Datto_610 wrote:Good work Damo! I thought you already had 910 bluebird struts but I guess not...
So did I until I actually researched it lol
User avatar
classicdat
Committee Members
Posts: 3259
Joined: Wed Apr 21, 2010 9:59 pm
aka: Vaughan
Location: Datsun Central, Christchurch
Contact:

Re: Dattodevil's GB120 Ute

Post by classicdat »

Dattodevil wrote:
classicdat wrote:Wow Happy Birthda GB120, First development in a long time Damo. Love this wee truck.
I notice the height is a bit different, are the calipers a different profile? Hope the won't cause you clearance issues
The calipers sit further out, but I run 15's so have plenty of room :D
Sweet will offset be OK?
Datsuns from A to Zed
Post Reply