Otodats vb11 rat wagon

Show everyone your mean datto projects/rides
Otodat
Datsun Driver
Posts: 298
Joined: Thu May 26, 2016 7:59 pm
aka: Steve
Location: Otorohanga
Contact:

Re: Otodats vb11 rat wagon

Post by Otodat »

E15s to Ga15ds engine swap

On the Ga15ds engine one fan belt runs the power steering and water pump. Another belt the alternator. I won’t be using power steering on this so I need to move the alternator, otherwise there is no drive for the water pump. The mount looks quite sturdy on this so I have cut a section off one side of the mount and moved it to the other as a spacer. Haven’t quite finished this yet as I need a longer belt which I can’t get right now.
E8EAA399-DD85-44DE-8710-91B98F432E38.jpeg
You do not have the required permissions to view the files attached to this post.
Otodat
Datsun Driver
Posts: 298
Joined: Thu May 26, 2016 7:59 pm
aka: Steve
Location: Otorohanga
Contact:

Re: Otodats vb11 rat wagon

Post by Otodat »

E15s to Ga15ds engine swap

From what I gather the Ga15ds uses a carb that is computer controlled, which is not gonna happen in this car. Ideally it will get a Weber or something similar. I wanted to see if the E15s carb would bolt up. Nope. The bolt pattern on the E15s looks the same size as an a15. The Ga15ds carb has a larger base plate and is a much bigger carb. I found a mystery carb I think is off either a later model E series( pretty sure it was a 87 Sentra)

So left to right E15s, mystery carb, Ga15ds
B4749F83-C263-4285-9331-D9D3E4DD6334.jpeg


I put the mystery carb on the engine, it ran the engine breifly. It would be good to know if the Ga15ds carb could be modified to run without an ecu if anyone knows.
You do not have the required permissions to view the files attached to this post.
Otodat
Datsun Driver
Posts: 298
Joined: Thu May 26, 2016 7:59 pm
aka: Steve
Location: Otorohanga
Contact:

Re: Otodats vb11 rat wagon

Post by Otodat »

E15s to Ga15ds engine swap

With regards to the wiring, i plan to use the e15s loom.
The temp sensor will go into the engine. The oil pressure switch needs the terminal on the wire changed. The alternator should be straight forward enough and by changing to a simple carb it will eliminate wires there. The only thing I’ve had to sort out is the distributor. It’s a neat setup on this motor with the coil internal in the distributor and only two wires to connect.
4FA05634-21D9-4583-9AAC-628B54FD8BDD.jpeg
B6E465FA-0E15-4DD9-881E-06F2235330F5.jpeg
I put word out to figure out what the two wires are for and it came back with one is power in and the other a signal for rpm. With the loom pulled back the wire closest to the vacuum pot is much larger than the other. I powered this up and the engine ran. :dance2:
You do not have the required permissions to view the files attached to this post.
Otodat
Datsun Driver
Posts: 298
Joined: Thu May 26, 2016 7:59 pm
aka: Steve
Location: Otorohanga
Contact:

Re: Otodats vb11 rat wagon

Post by Otodat »

E15s to Ga15ds engine swap

The b11 radiator is not going to fit, will update this when I find a suitable replacement
Otodat
Datsun Driver
Posts: 298
Joined: Thu May 26, 2016 7:59 pm
aka: Steve
Location: Otorohanga
Contact:

Re: Otodats vb11 rat wagon

Post by Otodat »

Oh did I mention the seats were a little uncomfortable
DD9104E8-F5AD-474E-9086-B4EB9264BD23.jpeg
Yes those pillows go straight through the seat and onto the floor lol.
You do not have the required permissions to view the files attached to this post.
Otodat
Datsun Driver
Posts: 298
Joined: Thu May 26, 2016 7:59 pm
aka: Steve
Location: Otorohanga
Contact:

Re: Otodats vb11 rat wagon

Post by Otodat »

Right, rewind back in time a bit and this was staring at me while I pulled the head off the E15.
CCF24EFD-8A00-4B85-9F1C-606E8F1B86CE.jpeg
Hmmm, bright white paint on a plate put over the firewall. Gee I wonder what ever could it be behind it? A priceless artwork perhaps? Maybe a winning lotto ticket?
3997F982-BA46-4CC2-8575-F9EE8F9A2AA1.jpeg
Oh! Rust, I never would have guessed!
Once I cut that section out I put my phone through a hole in the well behind it and took a photo.
41214E52-DA99-4D3B-86C8-C956E93687BB.jpeg
Time for some more cutting and dash removal
You do not have the required permissions to view the files attached to this post.
Otodat
Datsun Driver
Posts: 298
Joined: Thu May 26, 2016 7:59 pm
aka: Steve
Location: Otorohanga
Contact:

Re: Otodats vb11 rat wagon

Post by Otodat »

Cutting
BEB02BFF-EECD-4C91-8672-F04C2751DCFA.jpeg
More cutting
F90E1B60-C862-4AD8-8539-955F17A4F73C.jpeg
And even more cutting
EF10F78C-EC3D-433D-9E94-98C13CD891A7.jpeg
Rebuilt something resembling the heater intake and patched the hole through to the cabin
1E9E018D-B279-430E-9A2C-BB1AEC8928EC.jpeg
Reached through the cut out and rust converter followed by some paint I had lying around
C9D594DD-E0F4-4346-9BC8-168803C58704.jpeg
Followed by more paint
56D472E0-C7B1-4660-96FC-CD75EAD98503.jpeg
Should be the end of any wet feet!
Weld and bodge the cutout back in
C82B5486-5108-4A93-9B7C-6CA1D1A8E23E.jpeg
And made a new bit for the firewall and window wiper mount
5E7E792A-08BB-43D6-A806-00F078F80A00.jpeg
You do not have the required permissions to view the files attached to this post.
Otodat
Datsun Driver
Posts: 298
Joined: Thu May 26, 2016 7:59 pm
aka: Steve
Location: Otorohanga
Contact:

Re: Otodats vb11 rat wagon

Post by Otodat »

Next up A pillars. They were looking a bit crusty around the hinges on both sides
C26FF94F-E3B0-4D30-8A37-343C81361020.jpeg
Someone had had a go at this side before
D772D5DC-2FE1-47C6-ABD2-69DCA9DEAF9C.jpeg
With it cut open you can see a little chamber under two layers of panel steal that must be where the rust starts. I clean these up and painted them
6C7C6D6E-514E-4C8D-B9AF-6375E0871355.jpeg
74E12048-94D7-4D0C-914E-1ABC1927DD0D.jpeg
Made some patches and jammed them in
2DF6E9A5-3E3E-4472-8345-1605301AE063.jpeg
C0858D5A-6929-4F70-9E47-D2C9B2FB8BF0.jpeg
FA546E9C-CCFA-403D-A82E-25D0FA39DF90.jpeg
B269BA60-0D6B-49DF-A7C9-5120649964F2.jpeg
And done
43A4DB41-3FBB-42B7-8331-3314F92B383B.jpeg
You do not have the required permissions to view the files attached to this post.
tsC20
Datsun Dreamer
Posts: 127
Joined: Sun Aug 03, 2008 9:34 am
Location: Lower Hutt

Re: Otodats vb11 rat wagon

Post by tsC20 »

Awesome work !! One lucky B11 to have your dedication !
Otodat
Datsun Driver
Posts: 298
Joined: Thu May 26, 2016 7:59 pm
aka: Steve
Location: Otorohanga
Contact:

Re: Otodats vb11 rat wagon

Post by Otodat »

Thanks Tim! Hope you are doing well.
Post Reply