gingofthesouth's Orangatang 510

Show everyone your mean datto projects/rides
Post Reply
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

gingofthesouth's Orangatang 510

Post by gingofthesouth »

Soo here is my rebuilt thread without the bullshit.

1972 Datsun 1600
Purchased a couple years back and looked like this:
Datsun.jpg
Under what looked like a nice wee car was possible the worst case scenario. Rust for Africa, nothing lining up 100%, overspray on everything.

Before we get on with the build thread here is what the car currently looks like:
IMG_1430.JPG
IMG_1428.JPG
Time to rebuild.
Stripped almost everything out of the car and took it to sand blaster to get engine bay and under car done:
datsunBuild011.jpg
The result was SMH material. It showed the engine bay had been full of rust and bog. More importantly it made it extra clear how bad the front end damage was:
datsunBuild013.jpg
datsunBuild016.jpg
datsunBuild021.jpg
And rust in the sill caps:
datsunBuild023.jpg
So it was decided to go over the entire car bit by bit. The first and only bit of good news came when we removed all paint off the roof and pillars to find no rust there.

So it was onto the doors which I wanted shaved, and the side mirrors removed:
datsunBuild040.jpg
datsunBuild042.jpg
datsunBuild054.jpg
This continued for all 4 doors:
You do not have the required permissions to view the files attached to this post.
Last edited by gingofthesouth on Wed May 22, 2019 2:35 pm, edited 2 times in total.
My orangatang 510 here.
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: gingofthesouth's 510

Post by gingofthesouth »

So this continued for all 4 doors which also were full of rust and needed new patches put in on 3, and a new door for the 4th.

Front passenger door needed replacing as it was buggered and absolutely full of bog:
datsunBuild048.jpg
Shaving and rust repairs:
datsunBuild056.jpg
datsunBuild057.jpg
datsunBuild058.jpg
datsunBuild060.jpg
datsunBuild061.jpg
datsunBuild063.jpg
datsunBuild059.jpg
datsunBuild065.jpg
datsunBuild066.jpg
datsunBuild067.jpg
You do not have the required permissions to view the files attached to this post.
My orangatang 510 here.
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

gingofthesouth's Orangeatang 510

Post by gingofthesouth »

datsunBuild071.jpg
datsunBuild074.jpg
datsunBuild076.jpg
datsunBuild080.jpg
datsunBuild082.jpg
Now other bits like rear guards and boot:
datsunBuild084.jpg
datsunBuild085.jpg
YUCK!
datsunBuild086.jpg
datsunBuild088.jpg
datsunBuild090.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by gingofthesouth on Tue Mar 13, 2012 12:56 pm, edited 1 time in total.
My orangatang 510 here.
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: gingofthesouth's 510

Post by gingofthesouth »

datsunBuild091.jpg
Much better!
datsunBuild111.jpg
datsunBuild113.jpg
Now for the Boot:
datsunBuild093.jpg
datsunBuild094.jpg
datsunBuild096.jpg
datsunBuild115.jpg
Drop Tank area of Boot:
datsunBuild100.jpg
datsunBuild101.jpg
datsunBuild102.jpg
You do not have the required permissions to view the files attached to this post.
My orangatang 510 here.
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: gingofthesouth's 510

Post by gingofthesouth »

datsunBuild104.jpg
datsunBuild105.jpg
datsunBuild107.jpg
datsunBuild108.jpg
datsunBuild133.jpg
Because of the shaved doors I did not want to spoil the lines by leaving the petrol intake where it was. This was removed from the side and placed behind the number plate:
datsunBuild098.jpg
datsunBuild097.jpg
datsunBuild099.jpg
datsunBuild119.jpg
datsunBuild120.jpg
You do not have the required permissions to view the files attached to this post.
My orangatang 510 here.
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: gingofthesouth's 510

Post by gingofthesouth »

Sills needed replacing:
datsunBuild123.jpg
datsunBuild126.jpg
datsunBuild127.jpg
datsunBuild128.jpg
datsunBuild131.jpg
Some more door repairs:
datsunBuild161.jpg
datsunBuild162.jpg
datsunBuild165.jpg
Will finish off adding the rest of the build tonight.
You do not have the required permissions to view the files attached to this post.
My orangatang 510 here.
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: gingofthesouth's 510

Post by gingofthesouth »

Floor went from here:
datsunBuild167.jpg
datsunBuild171.jpg
To here:
datsunBuild172.jpg
datsunBuild176.jpg
datsunBuild177.jpg
datsunBuild179.jpg
And finished like this:
datsunBuild259.jpg
You do not have the required permissions to view the files attached to this post.
My orangatang 510 here.
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: gingofthesouth's 510

Post by gingofthesouth »

Whole right rear guard needed replacing as the previous job was a hatchet job!
datsunBuild186.jpg
datsunBuild189.jpg
datsunBuild190.jpg
The door locks needed filling in and the bolts for the seat belts replaced with nuts welded in on the inside!
datsunBuild191.jpg
datsunBuild193.jpg
Repairs to the front water drain area:
datsunBuild207.jpg
datsunBuild211.jpg
Front guards needed repair:
datsunBuild222.jpg
datsunBuild224.jpg
datsunBuild222.jpg
Take the paint off and you will find bog! Yuck this has to go!
datsunBuild225.jpg
You do not have the required permissions to view the files attached to this post.
My orangatang 510 here.
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: gingofthesouth's 510

Post by gingofthesouth »

The front.
Well we purchased a spares car to use the front off. Had that sand blasted and used spot weld drill bits to remove both fronts and swap them over with some other rust repairs on the way!

Front removed from spare car:
datsunBuild227.jpg
datsunBuild228.jpg
datsunBuild229.jpg
datsunBuild231.jpg
All fixed and ready to go!
datsunBuild232.jpg
Front off the proper car ready for the other front to go on:
datsunBuild233.jpg
Front on, valance on, guards on etc and sealed:
datsunBuild241.jpg
datsunBuild242.jpg
datsunBuild243.jpg
datsunBuild246.jpg
You do not have the required permissions to view the files attached to this post.
My orangatang 510 here.
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: gingofthesouth's 510

Post by gingofthesouth »

Under seal done!
datsunBuild263.jpg
datsunBuild262.jpg
Car mostly finished and ready to go to painters:
datsunBuild249.jpg
datsunBuild254.jpg
datsunBuild255.jpg
datsunBuild268.jpg
datsunBuild269.jpg
datsunBuild270.jpg
You do not have the required permissions to view the files attached to this post.
My orangatang 510 here.
Post Reply