1975 H330 station wagon

Show everyone your mean datto projects/rides
User avatar
brocky41
Financial Member
Posts: 1764
Joined: Sat Jul 19, 2008 11:05 am
aka: Brocky
Location: Christchurch
Contact:

Re: 1975 H330 station wagon

Post by brocky41 » Mon Dec 27, 2021 11:26 am

Nice work man - sorry i havent had a look for those heater bits for you yet.

How good are the H190 axles to pull - no need to even remove the wheels for quick diff changes lol :lol: :lol:

User avatar
Tony_Whenua
Financial Member
Posts: 413
Joined: Fri Jan 13, 2012 6:58 pm
Location: Blenheim
Contact:

Re: 1975 H330 station wagon

Post by Tony_Whenua » Mon Apr 18, 2022 6:41 pm

Tried to reassemble the rear axle today with the reversed leaf springs. Got it all together but I had the brakes cylinder at the top of the drum rather than on the bottom.
88C911C1-9100-41D4-A9A3-2CC993EB49B9.jpeg
Did some research/phone calls and more reading of the manual. Looks like I needed to swap sides a rotate backing plate to get bleeder to the bottom. When I did this the leaf spring is in the way of the handbrake cable 🤦‍♂️
73AF8C26-32BC-4CA4-8731-8F294179F878.jpeg
You do not have the required permissions to view the files attached to this post.
"Dude you're like 30 degrees retarded" - Chris_g1 & 2 Doors

User avatar
Tony_Whenua
Financial Member
Posts: 413
Joined: Fri Jan 13, 2012 6:58 pm
Location: Blenheim
Contact:

Re: 1975 H330 station wagon

Post by Tony_Whenua » Thu Apr 21, 2022 5:22 pm

So after all that, I had to put it back to how I originally assembled it. My thoughts are, due to the axle being shortened and the reversed eye leaf springs, the assembly like the manual explains just wasn’t going to work. So flipped the axles/ backing plates and all assembled!
24230114-25C6-421C-BE90-6F7798729BC4.jpeg

But heck the new height looks good
07C12340-2717-421D-84F5-A0BB09282DF7.jpeg

Also put the towball on for the bike rack
A850D159-C89F-4903-931E-C55D42B4E982.jpeg

In other news, the bearing wasn’t the issue, it was a bent axle so next mission is to source another and shorten it then reassemble.
I will make nationals :thumbsup:
You do not have the required permissions to view the files attached to this post.
"Dude you're like 30 degrees retarded" - Chris_g1 & 2 Doors

User avatar
Tony_Whenua
Financial Member
Posts: 413
Joined: Fri Jan 13, 2012 6:58 pm
Location: Blenheim
Contact:

Re: 1975 H330 station wagon

Post by Tony_Whenua » Sat Apr 23, 2022 7:09 pm

Sorted a 2nd hand axle, just need to collect it :burnout:

Onto the next area, I’ve had an exhaust leak from the headers so pulled the exhaust gasket off and it was poked.
C9740469-1B9F-4A41-90B5-91D2F3127B1D.jpeg
Had a replacement gasket for where the header pipes go from 2into1 so had that out too and it was also fecked.

Glad I’ve started the journey to replace it as it looks like it had started to leak into the intake ports. Unsure what damage that would be doing but either way it couldn’t have been good.
You do not have the required permissions to view the files attached to this post.
"Dude you're like 30 degrees retarded" - Chris_g1 & 2 Doors

2 doors
Datsun God
Posts: 2499
Joined: Sat Jul 19, 2008 6:26 pm
Location: Christchurch

Re: 1975 H330 station wagon

Post by 2 doors » Mon Apr 25, 2022 8:09 am

Good to see the wagon is getting some love , your doing a great job.

Post Reply