Page 1 of 1

5 stud on 280zx front struts.

Posted: Sun May 14, 2017 3:55 pm
by Rikky08
Hey all,
New to this page.
Am building my datsun 1200 coupe that I have owned for 15 years now.
Going to be extremely custom and ridiculously low.

So I have gone for the 280zx strut conversion,I want to run 5 stud though so anyone know of a hub that will bolt on?
I know t3 do a hub but at the exchange rate at the mo I don't really want to walk that path.
Any input would be huge
Thankyou in advance.

Re: 5 stud on 280zx front struts.

Posted: Sun May 14, 2017 6:07 pm
by DJZ
Z31 hubs use the same wheel bearings and will go on, but they are reasonably hard to find these days and brake options are not as good/easy as with HR31 struts.

Re: 5 stud on 280zx front struts.

Posted: Mon May 15, 2017 6:10 pm
by 85_Z31
If you can find the Z31 pentagon shaped hubs they can be machined into a 5 stud round hub, thats what im using on my car.

But as DJ said still not so easy to find