A12/a14 head PLEASE HELP !!

all your DIY needs
Post Reply
iamkiwiana
Newbie
Posts: 40
Joined: Thu Dec 03, 2015 3:04 pm
Location: Christchurch

A12/a14 head PLEASE HELP !!

Post by iamkiwiana »

So i purchase an engine from a mate, it's
18238778_1897871553829228_8445123489892426954_o.jpg
an a12 with a14 head, ported, planed, kelford racing cam and valve springs..
BUT... it didnt come with all valve train, only the valves and springs.
So the question is will my existing a12 head gear work on the a14 head ??
(pushrods, rockers etc) :dance:
You do not have the required permissions to view the files attached to this post.
User avatar
Josh
Financial Member
Posts: 1197
Joined: Tue Jul 22, 2008 5:23 pm
aka: SeEn-ThE_lIgHt
Location: Datsun Capital
Location: Hornby
Contact:

Re: A12/a14 head PLEASE HELP !!

Post by Josh »

may pay to double check pushrod length but rockers are the same
1969 Mk1 Escort Coupe~ CA18DET full-on project
1972 B110 Deluxe~ Daily
1965 P410~ Wifey daily
User avatar
classicdat
Committee Members
Posts: 3259
Joined: Wed Apr 21, 2010 9:59 pm
aka: Vaughan
Location: Datsun Central, Christchurch
Contact:

Re: A12/a14 head PLEASE HELP !!

Post by classicdat »

A12 push rods will work with A12 Block, head will be fine. Is it Front Dizzy or Mid Dizzy, oil galleries to the Valve gear are different, this could be an issue.
Datsuns from A to Zed
SOAPS
Newbie
Posts: 16
Joined: Sun Apr 28, 2019 4:56 pm
aka: soaps
Location: Gore
Contact:

Re: A12/a14 head PLEASE HELP !!

Post by SOAPS »

I have a14 pushrods. 166mm. tip to tip. will these help. cheers.
Post Reply