Page 1 of 1

A12/a14 head PLEASE HELP !!

Posted: Fri May 12, 2017 9:09 pm
by iamkiwiana
So i purchase an engine from a mate, it's
18238778_1897871553829228_8445123489892426954_o.jpg
an a12 with a14 head, ported, planed, kelford racing cam and valve springs..
BUT... it didnt come with all valve train, only the valves and springs.
So the question is will my existing a12 head gear work on the a14 head ??
(pushrods, rockers etc) :dance:

Re: A12/a14 head PLEASE HELP !!

Posted: Fri May 12, 2017 9:46 pm
by Josh
may pay to double check pushrod length but rockers are the same

Re: A12/a14 head PLEASE HELP !!

Posted: Fri May 12, 2017 11:08 pm
by classicdat
A12 push rods will work with A12 Block, head will be fine. Is it Front Dizzy or Mid Dizzy, oil galleries to the Valve gear are different, this could be an issue.

Re: A12/a14 head PLEASE HELP !!

Posted: Thu Mar 26, 2020 9:55 pm
by SOAPS
I have a14 pushrods. 166mm. tip to tip. will these help. cheers.