B310 sr20 conversion

all your DIY needs
Post Reply
Sunny side up
Newbie
Posts: 1
Joined: Sun Dec 06, 2015 9:26 am
Location: Auckland
Contact:

B310 sr20 conversion

Post by Sunny side up »

Hey am dropping a sr20 de into my b310 sunny am wanting to convert the engine from dizzy cap to coil packs. anybody on here that has done this before any advice would be greatly appreciated....cheers
User avatar
tlssunny
Financial Member
Posts: 724
Joined: Sun Jul 28, 2013 5:39 pm
aka: jesse
Location: rakaia
Contact:

Re: B310 sr20 conversion

Post by tlssunny »

pmd...........
RDAP- Rakaia Datsun b310 Auto Parts
TLS- The Late Shift Restoration Services
User avatar
torqued
Datsun God
Posts: 2124
Joined: Sat Jul 19, 2008 11:49 am
aka: Adam
Location: Christchurch

Re: B310 sr20 conversion

Post by torqued »

Since the CAS and the Dizzy mount different,
You'll be wanting to mount the CAS disk and pickup into the Dizzy case,
I did this on a VG there should be pics on my thread if interested on how i went about it.
It's pretty straight forward, but i did have to make some spacer washers.
"It's ok, we know what to do...we talked about this a lot on the internet."
R3spct
Datsun Dreamer
Posts: 165
Joined: Thu Jul 08, 2010 8:30 pm
Location: Auckland

Re: B310 sr20 conversion

Post by R3spct »

Is it a rwd sr20de? If so you can convert it to running DET cas and ecu with a daughter board to tune it. S13 sr20det ecus are a little hard to find, but are the easiest one to use and retune.
Image
Post Reply