Page 1 of 1

2.6, 2.8 L series triple carbs

Posted: Sun Nov 18, 2018 9:50 pm
by scooters
been having a look to get onto some triple carb set up.
Went down the road of pricing new. I figure if I had 5 K to kiss away that would be a good way to do it.

do theses pop up often ?

Re: 2.6, 2.8 L series triple carbs

Posted: Wed Nov 21, 2018 11:35 pm
by classicdat
They are not that common now a days, you some times get lucky, what are you wanting to fit them to? The Zed Forums and Facebook page may be worth a try, last set I had ended up on a Valiant, but they were 45s.

Re: 2.6, 2.8 L series triple carbs

Posted: Thu Nov 22, 2018 11:43 am
by mlracing
Mikuni ftw

Re: 2.6, 2.8 L series triple carbs

Posted: Sun Nov 25, 2018 11:28 am
by 240znz
I've got a set of Mukuni 44 PHH's off my 73 parts car which was running a L28. Had a stage 2 road cam in it so I guess jetted correctly. Never saw it running. No linkages. It is a Sanyo KIKI Sports Kit ex Japan.
Manifold has been blasted, backlite insulators, carbs cleaned in enzyme bath, full rebuild kits and your ready to rebuild / media blasting.
Also comes with 2 x 40 PHH for parts. Mukuni manual in English.

PM me if you are interested.