New Zealand Datsun Club

You can adjust the air flow meter, but make sure you mark it before you start.

http://xenonzcar.com/s130/afmrefresh.html

You should be able to get carpet locally from Autodec, things like the hand brake cut out and sometimes the foot rest part of the carpet will be on the wrong side if you get them from the US.

That's really cool.

Got some other bonnet latches for this after all the trouble I've been having with the small ones, the new ones are 1.75" OD and use an 8mm thread where the small ones were 1.25" and used a 6mm thread. Need to make much bigger holes in the bonnet to fit them but hopefully they'll stop it f...

roddsteel18 wrote:

DJZ wrote:What badges do you need? I might have some.

I am missing the badges from the side front wheel arch guards. (both sides)

Ah yup, you can still get them new off eBay for not much money, they won't be that common here.

What badges do you need? I might have some.

180bst wrote:Where or which track is the meet on the saturday. Cheers

Sent from my SM-G960F using Tapatalk

15 minutes North of Waiau.

Put an exhaust on this, it was the original exhaust off the red 2+2 so I had to shorten it a bit, the tail pipe comes out the wrong side at the back but I didn't want to cut the rear valence. I cut out two new flanges on the water jet and had to make up two new hangers for it but it turned out prett...

Water jet an EGR block off block plate out of some stainless and gave it a quick polish. https://i.imgur.com/EaDPuRI.jpg Also gave the big Nissan rocker cover that is going on it a sand blast, it came up pretty good, would need a little bit of filler if it's going to be painted in the future. Took t...

Any skids?