New Zealand Datsun Club

I have found that they tend to do that. Instead of being fully topped up, the level was closer to the top of the core. As long as it doesn't do it every time, it should be fine so long as you keep an eye on the coolant level.

Does anyone have a set of good 620 window squeegies? the rubber that runs along the bottom of the LH & RH windows. I ordered some new ones from over seas, installed them, rolled them up, rolled them back down and the rubber just peeled offand got sucked down into the door. I didn't even try the ...

Hi Guys, I have two twin side draft manifolds for sale.

First one is as new, never been used. just been sitting in the shed. It is for a round port A12 $250

Second one is used condition, but still very usable. It is an "A12 style" but has oval ports. $180

Willing to ship

Cheers

My thoughts were the same, however there more weight hanging off less studs. So im not too sure now.

I've only just geared myself up to do this job. my flatmate decided to do some work in the shed and paint his car. I know there will be a thread on this somewhere, I cant seem to find anything.. I am needing to know how deep to drill the holes between the intake ports. I was thinking just about 10mm...

Thanks for the fast and informative reply. I think I will do the same as you to block off the coolant holes. but I will have to locktite some grub screws in there for clearance. For the vacuum hose, do you think it would work if I tapped a hole into each runner and ran some 1/4" (ish) hose betw...

Hey guys, I am about to take my head off to drill and tap the hole into the head between the intake ports on my a15. For my twin side draft manifold. I was wondering if I need to make a blanking plate for the coolant holes which are underneath the ports? Or is the manifold enough to block those off?...

Does anyone know where to get the plastic bushes for the clutch pedal?

PM'd thanks mate

Hey guys,

I am looking for a B310 radiator. Or at least some measurements off one.. Im thinking about using the b310 radiator in my 620, as long as they are close to the same measurements. otherwise I will try find another 620 one.

Cheers