New Zealand Datsun Club

New caster arms have arrived with the most recent container shipment. So that was today's task.. pretty straight forward. http://iforce.co.nz/i/cftue0l3.3mu.jpg http://iforce.co.nz/i/oxaeoben.jt0.jpg So the reason I needed to change the driver side one was.. well as you can see it's bent. Looking at...

Nardi have some http://www.nardi-personal.com/index.php ... 41&lang=en

160JSSSfan wrote:What hako is in the latest performance car mag?

Steve

That's one of James' shorties. It's a 1500 Deluxe, short nose leaf springs etc.

Woohoo best day at work ever, I found the Butaketsu Laurel-type indicators that I thought I'd lost forever. http://iforce.co.nz/i/mba4frg2.454.jpg Original http://iforce.co.nz/i/fujwpcc5.uqg.jpg Years of gunk and nastiness http://iforce.co.nz/i/iftqcxwy.yd0.jpg New No more orange ! They don't fit su...

http://www.trademe.co.nz/1384509880 https://trademe.tmcdn.co.nz/photoserver/plusw/582069470.jpg https://trademe.tmcdn.co.nz/photoserver/plusw/582069461.jpg https://trademe.tmcdn.co.nz/photoserver/plusw/582069466.jpg As the title states, Enkei J-Speeds set for $1 reserve. Uncommon size here. 4x100 +2...

Bartman wrote:You can see that cam has had a serious regrind by the proximity of the base circle to the core of the cam.
looks like a nasty (in a good way) bump stick.

Good good now just need to get the bottom end back in order

torqued wrote:Get them to whack up the castor an extra degree on the left side.

Can't adjust it. The bent arm is being replaced soon though

Quickly took the car down for an alignment this arvo to try and work out the pulling to the left situation. Well have a look at the "before" spec below.. haha! http://iforce.co.nz/i/cegvnuya.53t.jpg http://iforce.co.nz/i/r2phakvp.y1v.jpg As they didn't have a listing for hako on the system...

http://iforce.co.nz/i/ovnf33by.4ct.jpg http://iforce.co.nz/i/uho35qrj.tqc.jpg http://iforce.co.nz/i/vavkyy4a.gmf.jpg http://iforce.co.nz/i/vmuggjb1.ryi.jpg http://iforce.co.nz/i/52f2cal0.nrs.jpg http://iforce.co.nz/i/1zfq3cmq.vjo.jpg It's been ages since I've really done anything towards this so I ...

Finished up the other side today and took it for a spin. I also took a couple extra pictures as a future reference potentially for anyone who needs this info as it took me a while to work this out. So in order to remove the brake disc from the hub took a bit of trickery for the average Joe. I suppos...