Search found 25 matches

by jmp
Wed Jan 31, 2018 11:23 am
Forum: Cars / Parts Wanted
Topic: 1200 front strut drum brake hubs wanted.
Replies: 7
Views: 4700

Re: 1200 front strut drum brake hubs wanted.

Hey mate.

Sorry for super late reply, datsuns been on the back burner for awhile. I’m still keen to take the hubs off you if there still available! Don’t worry about measuring them I’m sure they will work lol

I’m in Nelson so will need to be courier down if that works for you?

Cheers
by jmp
Wed Sep 13, 2017 9:14 pm
Forum: Cars / Parts Wanted
Topic: 1200 front strut drum brake hubs wanted.
Replies: 7
Views: 4700

Re: 1200 front strut drum brake hubs wanted.

Sweet mate looks good!
Where abouts are you? I'm really only after the hubs.... is it all good for you to strip them off the struts for me?
by jmp
Wed Sep 13, 2017 8:57 pm
Forum: Cars / Parts Wanted
Topic: 1200 front strut drum brake hubs wanted.
Replies: 7
Views: 4700

Re: 1200 front strut drum brake hubs wanted.

Vlturbo wrote:
jmp wrote:Bump! Still after these if someone has any?
I might have some in the shed, I'll check once I've had a clean out tomorrow


Sent from my iPhone using Tapatalk
Thanks man any luck in your shed?
Who would of thought these would be that hard to find!
by jmp
Thu Aug 17, 2017 8:23 pm
Forum: Cars / Parts Wanted
Topic: 1200 front strut drum brake hubs wanted.
Replies: 7
Views: 4700

Re: 1200 front strut drum brake hubs wanted.

Bump! Still after these if someone has any?
by jmp
Mon Jul 17, 2017 10:27 am
Forum: Cars / Parts Wanted
Topic: 1200 front strut drum brake hubs wanted.
Replies: 7
Views: 4700

1200 front strut drum brake hubs wanted.

As above, I am doing the s13 brake upgrade but have found my disk brake front end hubs are widening the track too much and are causing fitment issues for my rims. The drum brake hubs are apparently 10mm thinner so i will try that before i look at different offset rims. I am happy to take a full set ...
by jmp
Tue Aug 30, 2016 2:52 pm
Forum: Tech & DIY Conversion Info
Topic: R200 LSD differences
Replies: 7
Views: 16181

Re: R200 LSD differences

Cheers for the replies guys After a bit more research looks like this was indeed a factory nissan unit as it has less clutch plates and a thick spring washer. Aftermarket units like nismo has almost double the clutch plates and the 'spring pressure' is supplied from 4 clutch plates which are dished ...
by jmp
Wed Aug 24, 2016 11:48 am
Forum: Tech & DIY Conversion Info
Topic: R200 LSD differences
Replies: 7
Views: 16181

Re: R200 LSD differences

Here is some pictures of the new LSD I was going to fit to show the difference
by jmp
Wed Aug 24, 2016 11:40 am
Forum: Tech & DIY Conversion Info
Topic: R200 LSD differences
Replies: 7
Views: 16181

R200 LSD differences

Hey guys Was pulling a locked R200 out of a mates 260z to fit a newer lsd and found it already had a super tight lsd but it's a type Iv never seen before, anyone know how this type works? It has the standard clutch plate setup with a fairly thick dished Spring washer on each side of the spider gears...
by jmp
Fri Aug 28, 2015 7:34 pm
Forum: Tech & DIY Conversion Info
Topic: B110 - Lowered springs need shortened shocks?
Replies: 6
Views: 4861

Re: B110 - Lowered springs need shortened shocks?

I have king springs in my 1200 ute which I cut a coil off the top to get slamage. I just took my insert out and got an engineering shop to trim 2 inches off the top and rethread in a lathe think it cost me 50 bucks and passes warrants no problems
by jmp
Wed Aug 05, 2015 4:15 pm
Forum: Cars / Parts Wanted
Topic: 1200 ute bump stops
Replies: 1
Views: 1856

1200 ute bump stops

Hey guys

I'm after some 1200 ute bump stops that I can cut down for my ute.

Cheers